<tbody id="2fz21"><pre id="2fz21"></pre></tbody>

    1. <th id="2fz21"></th>
      1. T:010-84282935 | E:sales@cnmec.biz


        主要產品

        CAN總線顯示器

         
         
         
         
         
          液位儀表
         

        振動開關

         
         
         
         
         
         
         
         
         
         

        發動機J1939總線產品

          Battery Chargers
         
         
         
         
         
         
         
        市場應用
         
         
         

        工業市場

         

        石油天然氣業績案例

         
        最新消息
         

        展覽計劃

         
         

         

        SenderCAN TM 傳感器信號轉換器
        MURPHY SenderCAN SAE J1939 Input and Output Module

        產品介紹

        SenderCAN TM 是一款小巧輕便的 傳感器信號 轉換器。它用于把傳感器阻抗輸出或開關量轉化為 SAEJ1939 CAN 總線數據。 SenderCAN 有 4 路輸入和 2 路輸出,我們可根據客戶的要求對每路輸入量和輸出量進行設置。輸入可設置為開路或閉路的開關量,或阻抗傳感器輸入。輸入數據以適當的 PGN 地址、轉換比例和傳輸速率被轉換為 J1939 CAN 總線信息;诮邮 到的 CAN 總線 數據,輸出量可設置并驅動儀表、指示燈、繼電器及其它類型的控制元件。 SenderCAN 體積小巧輕便,可置于線束當中,也可通過四個安裝孔固定于面板上。產品 以環氧樹脂灌注封裝,極大地增加了抗振能力和產品的防護等級。 SenderCAN is a compact, encapsulated input & output module for J1939 CANbus systems.SenderCAN allows the integration of analogue and digital measurement, control and indicating devices into modern CAN and ECU-based engines and systems. SenderCAN has up to four inputs and two outputs, each of which is factory configured to OEM requirements. Inputs can be set for use with resistive sender or switch signals, which are translated into J1939 CANbus messages with appropriate PGN address, data scaling and transmission rate. Outputs can be configured to drive gauges, lamps, relays or other control devices, based on received J1939 data.

        MURPHY SenderCAN SAE J1939 Input and Output Module Data Sheet

         

        •  與 SAE J1939 CAN 總線電控發動機兼容

        •  可接受 4 個傳感器模擬量或開關量輸入

        •  2 路儀表或控制輸出

        •  可根據客戶要求定制輸入阻抗曲線

        •  PGN 地址和信號傳輸速率

        •  小巧輕便 , 防護等級 IP65

        產品規格Specifications :

        Power Supply
        Operating Voltage: 7 to 35 VDC

        Current Consumption: 25 mA (typ.)

        Input/Output
        Input range: OEM/application specific, -2 to +35 VDC max

        Output: OEM/application specific, 250mA max

        CANbus: SAE J1939 protocol, optional 120 Ohm terminating resistor

        Physical
        Case material: High-impact ABS, epoxy filled

        Case dimensions: 100 x 25 x 15 mm/4.0 x 1.0 x 0.6 in.

        Weight: approx. 60g/0.13 lb

        Operating temperature: –20°C to +85°C / –4°F to +185°F

        Environmental sealing: IP65 case, exposed lead ends

        Electromagnetic compatibility: 2004/108/EC

         

        如何訂購

        Power supply

        • Operating voltage: 7 to 35 VDC
        • Current consumption: 25mA (typ.)

        Input/Output

        • Input range: OEM/application specific, -2 to +35 VDC max
        • Output: OEM/application specific, 250mA max.
        • CANbus: SAE J1939 protocol, optional 120 Ohm terminating resistor

        Physical

        • Case material: High impact ABS, epoxy filled
        • Weight: Approx 60 g / 0.13 lb
        • Operating temperature: -40oF to +185oF / (-40o C to +85o C)
        • Environmental Sealing: IP65 case, exposed lead ends
        • Electromagnetic compatibility: 2004/108/EC
        • Electrical:
          • J1113-11 pulses 1c, 2a, 3a/b and 5a
          • EN 61000-4-2 ESD
          • EN 61000-4-3 Radiated disturbance
          • EN 61000-4-4 Fast transients
          • EN 61000-4-5 High Energy transients
          • EN 61000-4-6 Conducted RF disturbance
          • CISPR 16-1-2, 4.3 Conducted emissions
          • CISPR 16-2-3 Radiated emissions

        - Downloads

         

         


        Murphy by Enovation Controls | FW Murphy Production Controls
        Murphy Instrument Distributor
        信德邁科技(北京)有限公司 CNMEC Technology

        地址:北京市朝陽區望京街10號望京SOHO - T1- C座2115室
        郵編:100102
        電話:010 - 8428 2935,8428 9077,8428 3983
        手機:13910122694
        網站:Http://www.gsiia.cn

        VIEW ONLINE CATALOG >>
        REQUEST A CUSTOM PANEL QUOTE >>


        QQ: 209136943
        Email: sales@cnmec.biz
        傳真:010-8428 8762

        美國DMK Engineering Solutions公司


        京ICP備08000876號-3
        京公網安備 101050201974