<tbody id="2fz21"><pre id="2fz21"></pre></tbody>

    1. <th id="2fz21"></th>
      1. T:010-84282935 | E:sales@cnmec.biz


        主要產品

        CAN總線顯示器

         
         
         
         
         
          液位儀表
         

        振動開關

         
         
         
         
         
         
         
         
         
         

        發動機J1939總線產品

          Battery Chargers
         
         
         
         
         
         
         
        市場應用
         
         
         

        工業市場

         

        石油天然氣業績案例

         
        最新消息
         

        展覽計劃

         
         

         

        MURPHY PowerView PVM Gauges J1939 CAN/MurphyLink
        Murphy PowerView PVM儀表


        Murphy PVM的系列計的智能計用于顯示容易讀取信息轉發PowerView。 PVM的計溝通PowerView通過單個485 雙絞線Modbus RTU通訊串行鏈路。該計可以菊花鏈使用快速連接線束。 PVM的計主要特點是其設計和功能之間的平衡。這些現代計提供了邊框樣式和顏色選擇于本文件第3所示。計的PVM的還包括,如順利的步進為270掃描指針,一個有兩個放大器微型通用伴侶氮密封的環境下電機運行特性樂連接塑造成的外殼,和綠色LED背光照明。


        產品名稱:MURPHY PowerView PVM儀表.PDF

        Murphy PowerView PVM儀表特點:

        • 現代電子設備的使用發動機和汽車工程師協會J1939控制器局域網
        • 顯示汽車工程師協會J1939的PowerView系統播放的參數。
        • 尖端,步進電機技術和強大的功能相結合,高精度驅動微處理器
        • 簡單的安裝和布線設計

        PowerView PVM Gages


        For modern electronic engines and equipment using SAE J1939 Controller Area Network
        Display SAE J1939 parameters broadcast by the PowerView system.
        Cutting-edge, stepper motor technology and robust functionality combined
        Microprocessor driven for high accuracy
        Simple installation and wiring design

        Description

        The PowerView PVM Series gages are intelligent gages designed to display easy-to-read information transmitted by the PowerView. The PVM gages communicate with the PowerView via a single RS485 twisted pair MODBUS? RTU serial link. The gages can be daisy-chained using quick-connect harnesses.

        The major feature of the PVM gages is their balance between design and functionality. These modern gages offer a selection of bezel styles and colors shown on page 3 of this document.

        The PVM gages also include features such as a smooth stepper motor operation for the 270° sweep pointer, an environmentally sealed case with two Amp Mini Universal Mate-N-Lok connectors molded into the casing, and green LED back lighting. They are available for standard 2-1;16 in. (52 mm) and 3-3/8 in. (86 mm) diameter hole sizes. In addition their plastic cases incorporate a “D” shape allowing panel cutouts that eliminate gage rotation during installation.


        PVM20 Series Models

        • PVM20-A = Engine Oil Pressure
        • PVM20-B = Coolant Temperature
        • PVM20-C = Voltmeter
        • PVM20-D = Percent Load at current RPM
        • PVM20-E = Transmission Oil Pressure
        • PVM20-F = Transmission Oil Temperature
        • PVM20-G = Engine Oil Temperature
        • PVM20-H = Hydraulic Oil Temperature
        • PVM20-J = Percent Fuel Level
        • PVM20-K = Boost Pressure
        • PVM20-L = Exhaust Gas Temperature
        • PVM20-M = Intake Manifold Temperature
        • PVM20-N = Auxiliary Temperature
        • PVM20-P = Auxiliary Pressure
        • PVM20-T = Tachometer


        PVM35 Series Models

        • PVM35-T = Tachometer
        • PVM35-S = Speedometer

         

        The PowerView PVM Series Gages are intelligent gages designed to display easy-to-read information transmitted by PowerView. The PVM gages communicate with PowerView via a single RS485 twisted pair MODBUS RTU serial link. The gages can be daisy-chained using quick-connect harnesses.

        The major feature of the PVM gage is its balance between design and functionality. These modern gages offer a selection of lens and bezel styles and colors.

        The PVM gages also include features such as a smooth stepper motor operation for the 270° sweep pointer, an environmentally sealed case with two Amp Mini Universal Mate-N-Lok connectors molded into the casing, and green LED backlighting. They are available for standard 2-1/6” (52mm) and 3-3/8” (86mm) diameter hole sizes. Their plastic cases incorporate a D shape allowing panel cutouts that eliminate gage rotation during installation.

        PVM20 Series Models

        • PVM20-A = Engine Oil Pressure
        • PVM20-B = Coolant Temperature
        • PVM20-C = Voltmeter
        • PVM20-D = Percent Load at current RPM
        • PVM20-E = Transmission Oil Pressure
        • PVM20-F = Transmission Oil Temperature
        • PVM20-G = Engine Oil Temperature
        • PVM20-H = Hydraulic Oil Temperature
        • PVM20-J = Percent Fuel Level
        • PVM20-K = Boost Pressure
        • PVM20-L = Exhaust Gas Temperature
        • PVM20-M = Intake Manifold Temperature
        • PVM20-N = Auxiliary Temperature
        • PVM20-P = Auxiliary Pressure
        • PVM20-T = Tachometer

        PVM35 Series Models

        • PVM35-T = Tachometer
        • PVM35-S = Speedometer

        Specifications

        PV101 Compatibility

        • Maximum supported : 5 PVM gages
        • Maximum distance to last gage : 8.5 meters
        • Power Supply Input Voltage : 5V (4.5-5, 5.5 VDC minimum & maximum voltage)
        • Power Supply Operating Current (@ 5 VDC): PVM20, PVM35: 18 mA minimum; 80 mA maximum
        • Backlight Maximum Current : 60 mA
        • Input : RS485 MODBUS RTU data
        • Output : Analog readout

        Environmental

        • Operating Temperature : -40° to 185°F (-40° to 85°C)
        • Storage Temperature : -67° to 185°F (-55° to 85°C)
        • Environmental Sealed Enclosure :
          • Sealing : IP68, ±5PSI (±34.4 kPa)
          • Case and Clamp Material : Polyester (PBT)
          • Lens Material : Polycarbonate
          • Bezel Material : Polyester (PBT)
        • Dial : White numerals over black background
        • Return-to-Zero Needle Movement : Not available for PVM20 models
        • Indicating Pointer : Stepper motor operation with 270° sweep
        • Gage Accuracy : Better than ±1.0% of scale
        • Maximum Panel Thickness : 3/8 in. (9.6 mm)
        • Connectors :
          • Amp Mini Universal Mate-N-Lok
          • Amp Plug P/N: 172338-1
          • Amp Socket P/N: 171639-1
        • Shipping Weight : 1 lb. (450 g)
        • Shipping Dimensions : 6 x 6 x 6 in. (153 x 153 x 153 mm)

        For more information about this product, you can download the related literature here:

         


        Murphy by Enovation Controls | FW Murphy Production Controls
        Murphy Instrument Distributor
        信德邁科技(北京)有限公司 CNMEC Technology

        地址:北京市朝陽區望京街10號望京SOHO - T1- C座2115室
        郵編:100102
        電話:010 - 8428 2935,8428 9077,8428 3983
        手機:13910122694
        網站:Http://www.gsiia.cn

        VIEW ONLINE CATALOG >>
        REQUEST A CUSTOM PANEL QUOTE >>


        QQ: 209136943
        Email: sales@cnmec.biz
        傳真:010-8428 8762

        美國DMK Engineering Solutions公司


        京ICP備08000876號-3
        京公網安備 101050201974