<tbody id="2fz21"><pre id="2fz21"></pre></tbody>

    1. <th id="2fz21"></th>
      1. T:010-84282935 | E:sales@cnmec.biz


        主要產品

        CAN總線顯示器

         
         
         
         
         
          液位儀表
         

        振動開關

         
         
         
         
         
         
         
         
         
         

        發動機J1939總線產品

          Battery Chargers
         
         
         
         
         
         
         
        市場應用
         
         
         

        工業市場

         

        石油天然氣業績案例

         
        最新消息
         

        展覽計劃

         
         

         

         

        Thermocouple Temperature Sensors & Instruments
        熱電偶(溫度傳感器和儀表)

         

        熱電偶封裝在直徑為1/4英寸的316不銹鋼管套中,帶不銹鋼鐘簧,用于消除應變。首次發行的產品是K型熱電偶,帶有6英寸和10英寸長、直徑為1/4英寸的探頭。熱電偶直接裝運,但可使用標準彎管機沿其長度彎曲至90°角,以盡量減少所需間隙,并有助于防止因操作裝置的人員造成損壞。熱電偶是尖端敏感型,可將環境溫度影響降至最低,且應插入管道內徑的25%至75%之間,或足以將安裝在容器中時探頭尖端的任何表面溫度影響降至最低。The thermocouples are encased in a 1/4 inch diameter 316 stainless steel tubing sheath with stainless steel Bell Spring for strain relief. The initial offerings are K type thermocouples with 6-inch and 10-inch long 1/4-inch diameter probes. The thermocouples are shipped straight but can be bent with standard tubing benders anywhere along its length to a 90° angle to minimize clearance required and help prevent damage due to personnel working on the unit. The thermocouple is tip sensitive to minimize ambient temperature influence and should be inserted between 25% and 75% of the piping inside diameter or enough to minimize any skin temperature affect on the tip of the probe when installed in vessels.

         

         

        • ?″ Diameter 316 Stainless Steel Tubing Sheath
        • Type K, 6" and 10" Probes
        • Can be Used With 2", 4.5" and 7.5" Insertion Thermowells
        • Can be Bent Anywhere Along its Length to a 90° Angle
        • Tip Sensitive to Minimize Temperature Influence From Surrounding Environment

         

         

         

        Features

        • Stainless steel transition sealing gland with a stainless steel Bell Spring for strain relief.
        • Standard bore through stainless steel compression fitting for securing the thermocouple in the thermowell at the appropriate depth.
        • Can be inserted directly into a low-pressure application process through a standard 1/4-inch stainless steel bore through tubing compression fitting.
        • Enables a run from the point of measurement to the nearest conduit entry, junction box or all the way to the panel housing the readout and monitoring instrument. Can also be installed in a cable tray.
        • The thermowell assembly comes with a stainless steel bore through compression fitting and ferrule saving installation time and money.


        Thermowells

        Thermowells are available in 2-inch, 4-1/2 inch or 7-1/2 inch lengths for insertion depth and have a 1/2-inch NPT process connection. They are supplied with a standard stainless steel compression fitting for securing the thermocouple in the thermowell at the appropriate depth. In low-pressure applications the thermocouple can be inserted directly into the process through a standard 1/4-inch SS tubing compression fitting.

        Extension Wire

        The Type K, 20 AWG stranded extension wire encased in a rugged cable meets demanding environments. The industry standard yellow Teflon allows easy identification of K type thermocouple wires so they can be separated from high voltage wires following good installation practices.

        Specifications:

        Part Number Description Notes
        10051331 Thermocouple, Type K, 1/4Dia. Tube x 6”L w/5' Thermocouple Extension Wire
        10051325 Thermocouple, Type K, 1/4Dia. Tube x 6”L w/15' Thermocouple Extension Wire
        10051326 Thermocouple, Type K, 1/4Dia. Tube x 6”L w/30' Thermocouple Extension Wire
        10051327 Thermocouple, Type K, 1/4Dia. Tube x 6”L w/50' Thermocouple Extension Wire
        10051395 Thermocouple, Type K, 1/4Dia. Tube x 6"L w/75' Thermocouple Extension Wire
        10051328 Thermocouple, Type K, 1/4Dia. Tube x 6”L w/100' Thermocouple Extension Wire
        10051332 Thermocouple, Type K, 1/4Dia. Tube x 10”L w/5' Thermocouple Extension Wire
        10051323 Thermocouple, Type K, 1/4Dia. Tube x 10”L w/15' Thermocouple Extension Wire
        10051317 Thermocouple, Type K, 1/4Dia. Tube x 10”L w/30' Thermocouple Extension Wire
        10051322 Thermocouple, Type K, 1/4Dia. Tube x 10”L w/50' Thermocouple Extension Wire
        10051396 Thermocouple, Type K, 1/4Dia. Tube x 10"L w/75' Thermocouple Extension Wire
        10051321 Thermocouple, Type K, 1/4Dia. Tube x 10”L w/100' Thermocouple Extension Wire
        10707436 Thermowell, ?”NPT, ?” T, 2.0”L Assembly 304SS
        10707437 Thermowell, ?”NPT, ?” T, 4.5”L Assembly 304SS
        10707438 Thermowell, ?”NPT, ?” T, 7.5”L

        Assembly 304SS

        For more information about this product, you can download the related literature here:

         

         

         


        Murphy by Enovation Controls | FW Murphy Production Controls
        Murphy Instrument Distributor
        信德邁科技(北京)有限公司 CNMEC Technology

        地址:北京市朝陽區望京街10號望京SOHO - T1- C座2115室
        郵編:100102
        電話:010 - 8428 2935,8428 9077,8428 3983
        手機:13910122694
        網站:Http://www.gsiia.cn

        VIEW ONLINE CATALOG >>
        REQUEST A CUSTOM PANEL QUOTE >>


        QQ: 209136943
        Email: sales@cnmec.biz
        傳真:010-8428 8762

        美國DMK Engineering Solutions公司


        京ICP備08000876號-3
        京公網安備 101050201974